From d6ce00f6b68d3d1ecaf44c972909f311ac1d3bf8 Mon Sep 17 00:00:00 2001
From: jinlicong <493886250@qq.com>
Date: Thu, 09 May 2024 19:54:54 +0800
Subject: [PATCH] 增加电源管理部分功能
---
HARDWARE/EXTI/exti.c | 17 +++++++++--------
1 files changed, 9 insertions(+), 8 deletions(-)
diff --git a/HARDWARE/EXTI/exti.c b/HARDWARE/EXTI/exti.c
index 9280dfd..1b671e7 100644
--- a/HARDWARE/EXTI/exti.c
+++ b/HARDWARE/EXTI/exti.c
@@ -8,6 +8,7 @@
#include "key.h"
#include "valve_control.h"
#include "system_mem_para.h"
+#include "system_run_fun.h"
void NMI_Handler(void)
{
@@ -90,8 +91,8 @@
if(KEY2_IO_READ==Bit_RESET)
{
//�ɼ����������ݲ������ϱ�
-
-
+ start_rs485_g = RS485_START_REASON_KEY;
+ start_wrc_g = WRC_MEANS_KEY;
}
}
}
@@ -151,9 +152,9 @@
////#endif
//// }
//// }
-// if(GPIO_EXTI_EXTIISR_ChkEx(LITHIUM_PWR_DOWN_PORT, LITHIUM_PWR_DOWN_PIN) == SET)
+// if(GPIO_EXTI_EXTIISR_ChkEx(LITH_PWR_LOSE_PORT, LITH_PWR_LOSE_PIN) == SET)
// {
-// GPIO_EXTI_EXTIISR_ClrEx(LITHIUM_PWR_DOWN_PORT, LITHIUM_PWR_DOWN_PIN);
+// GPIO_EXTI_EXTIISR_ClrEx(LITH_PWR_LOSE_PORT, LITH_PWR_LOSE_PIN);
//#ifdef RS232_PRINTF
// printf("﮵����\r\n");
//#endif
@@ -162,9 +163,9 @@
// SLAVE_PWR_OFF; //�����С���ѹ���ȣ�������������ݻ��ң��Ӷ����¸��ַ�����������������Ҫ�رյ�Դ���ָ����ٿ�����
//// pwr_vol_g.lith_flag = LMS_PERIOD; // ���������ɼ�һ�ε���
// }
-// if(GPIO_EXTI_EXTIISR_ChkEx(ALKALI_PWR_DOWN_PORT, ALKALI_PWR_DOWN_PIN) == SET)
+// if(GPIO_EXTI_EXTIISR_ChkEx(ALKALI_PWR_LOSE_PORT, ALKALI_PWR_LOSE_PIN) == SET)
// {
-// GPIO_EXTI_EXTIISR_ClrEx(ALKALI_PWR_DOWN_PORT, ALKALI_PWR_DOWN_PIN);
+// GPIO_EXTI_EXTIISR_ClrEx(ALKALI_PWR_LOSE_PORT, ALKALI_PWR_LOSE_PIN);
//#ifdef RS232_PRINTF
// printf("������\r\n");
//#endif
@@ -181,9 +182,9 @@
//
// GPIO_EXTI_Init( KEYA_S1_PORT, KEYA_S1_PIN, EXTI_FALLING, ENABLE); //�����жϴ��½��ش��������������˲� //PD6
// GPIO_EXTI_Init( VALVE_FORCED_OPEN_PORT, VALVE_FORCED_OPEN_PIN, EXTI_RISING, ENABLE); //PA1
-// GPIO_EXTI_Init( LITHIUM_PWR_DOWN_PORT, LITHIUM_PWR_DOWN_PIN, EXTI_FALLING, ENABLE); //PF11
+// GPIO_EXTI_Init( LITH_PWR_LOSE_PORT, LITH_PWR_LOSE_PIN, EXTI_FALLING, ENABLE); //PF11
//// GPIO_EXTI_Init( LIT_PWR_UNDER_PORT, LIT_PWR_UNDER_PIN, EXTI_FALLING, ENABLE); //PF6
-// GPIO_EXTI_Init( ALKALI_PWR_DOWN_PORT, ALKALI_PWR_DOWN_PIN, EXTI_FALLING, ENABLE); //PA4
+// GPIO_EXTI_Init( ALKALI_PWR_LOSE_PORT, ALKALI_PWR_LOSE_PIN, EXTI_FALLING, ENABLE); //PA4
//// GPIO_EXTI_Init( UNCAP_DETECTION_PORT, UNCAP_DETECTION_PIN, EXTI_RISING, ENABLE); //PF5
//// GPIO_PINWKSEL_SetEx(PINWKEN_PF5,GPIO_PINWKEN_PINWKSEL_RISING);
--
Gitblit v1.9.3