From 72def895431ad7a08e635b11f3da738e2b2c4618 Mon Sep 17 00:00:00 2001
From: wujiazhi <1147861305@qq.com>
Date: Thu, 13 Jun 2024 11:31:04 +0800
Subject: [PATCH] add lower model test
---
HARDWARE/EXTI/exti.c | 224 ++++++++++++++++++-------------------------------------
1 files changed, 74 insertions(+), 150 deletions(-)
diff --git a/HARDWARE/EXTI/exti.c b/HARDWARE/EXTI/exti.c
index f240803..8369d58 100644
--- a/HARDWARE/EXTI/exti.c
+++ b/HARDWARE/EXTI/exti.c
@@ -2,144 +2,48 @@
#include "key.h"
#include "gpio.h"
#include "uart.h"
-#include "eeprom.h"
-#include "extern_rtc.h"
-#include "system_general_para.h"
-#include "key.h"
+#include "e2p.h"
#include "valve_control.h"
-#include "system_mem_para.h"
-#include "system_run_fun.h"
#include "power_manage.h"
+#include "lcd.h"
+#include "master_slave_inter.h"
+#include "low_pwr_test.h"
-void NMI_Handler(void)
-{
-// //NWKUPĬ�����ӵ���cpu��NMI���������жϣ�����NVIC���ƣ�����ȫ���ж�ʹ�ܿ��ƣ����Ѻ��Ȼ��NMI�ж�
-// if( SET == PMU_WKFR_WKPxF_Chk(PINWKEN_PF5) )
-// {
-// PMU_WKFR_WKPxF_Clr(PINWKEN_PF5);
-// __SYS_STATUS_ALARM_BYTES_SET(uncap_state_1);
-//#ifdef RS232_PRINTF
-// printf("���DZ���\r\n");
-//#endif
-// }
-}
-void GPIO_IRQHandler(void)
-{
+// void NMI_Handler(void)
+// {
+// //NWKUPĬ�����ӵ���cpu��NMI���������жϣ�����NVIC���ƣ�����ȫ���ж�ʹ�ܿ��ƣ����Ѻ��Ȼ��NMI�ж�
+// if( SET == PMU_WKFR_WKPxF_Chk(PINWKEN_PF5) )
+// {
+// PMU_WKFR_WKPxF_Clr(PINWKEN_PF5);
+// __SYS_STATUS_ALARM_BYTES_SET(uncap_state_1);
+// #ifdef RS232_PRINTF
+// printf("���DZ���\r\n");
+// #endif
+// }
+// }
+
+//void GPIO_IRQHandler(void)
+//{
// if(__SYS_DELAY_SEC_FLAG_GET(sys_active_time) == SET && LargeCurrent_LimitingProcess() == 3)
- SysWakeUp_ClockCfg();
- if(GPIO_EXTI_EXTIISR_ChkEx(EXT_RTC_INT_PORT, EXT_RTC_INT_PIN) == SET) //RTC�ж�
- {
- GPIO_EXTI_EXTIISR_ClrEx(EXT_RTC_INT_PORT, EXT_RTC_INT_PIN);
- sys_run_period = SET;
-
- // �ж�ϵͳ����ʱ���Ƿ����
- if (sys_delay_sec_para_g.sys_active_time.delay_time)
- {
- if (!(--sys_delay_sec_para_g.sys_active_time.delay_time))
- {
- sys_delay_sec_para_g.sys_active_time.delay_flag = SET;
- }
- }
-
- // �ж�GPRS��ʱʱ��
- if (sys_delay_sec_para_g.gprs_timeout_para.delay_time)
- {
- if (!(--sys_delay_sec_para_g.gprs_timeout_para.delay_time))
- sys_delay_sec_para_g.gprs_timeout_para.delay_flag = SET;
- }
-
-
- }
-
- if(GPIO_EXTI_EXTIISR_ChkEx(KEY1_PORT, KEY1_PIN) == SET) //key1�ж�,��Դ
- {
- GPIO_EXTI_EXTIISR_ClrEx(KEY1_PORT, KEY1_PIN);
-
- if(KEY1_IO_READ==Bit_RESET)
- {
- if(KEY3_IO_READ==Bit_RESET)
- {
- //����
-
- }else if(KEY2_IO_READ==Bit_RESET)
- {
- //�ط�
-
- }else
- {
- //������Դ
-
- }
-
- }
- }
-
- if(GPIO_EXTI_EXTIISR_ChkEx(KEY2_PORT, KEY2_PIN) == SET) //key2�ж�
- {
- GPIO_EXTI_EXTIISR_ClrEx(KEY2_PORT, KEY2_PIN);
- if(KEY2_IO_READ==Bit_RESET)
- {
-
- }
- }
-
- if(GPIO_EXTI_EXTIISR_ChkEx(KEY3_PORT, KEY3_PIN) == SET) //key3�ж�
- {
- GPIO_EXTI_EXTIISR_ClrEx(KEY3_PORT, KEY3_PIN);
- if(KEY3_IO_READ==Bit_RESET)
- {
- if(KEY2_IO_READ==Bit_RESET)
- {
- //�ɼ����������ݲ������ϱ�
- start_rs485_g = RS485_START_REASON_KEY;
- start_wrc_g = WRC_MEANS_KEY;
- }
- }
- }
-
- if(GPIO_EXTI_EXTIISR_ChkEx(KEY4_PORT, KEY4_PIN) == SET) //key4�ж�
- {
- GPIO_EXTI_EXTIISR_ClrEx(KEY4_PORT, KEY4_PIN);
-
- }
-
- if(GPIO_EXTI_EXTIISR_ChkEx(Motor_OP_PORT, Motor_OP_PIN) == SET) //���ſ���λ�ж�
- {
- GPIO_EXTI_EXTIISR_ClrEx(Motor_OP_PORT, Motor_OP_PIN);
-
- ValveMotorStop();//�ر�����
- save_valve_para_g.valve_status = VALVE_OPEN;
-
- }
-
- if(GPIO_EXTI_EXTIISR_ChkEx(Motor_CL_PORT, Motor_CL_PIN) == SET) //���Źص�λ�ж�
- {
- GPIO_EXTI_EXTIISR_ClrEx(Motor_CL_PORT, Motor_CL_PIN);
-
- ValveMotorStop();//�ر�����
- save_valve_para_g.valve_status = VALVE_CLOSE;
-
- }
-
-
- if(GPIO_EXTI_EXTIISR_ChkEx(LITH_PWR_LOSE_PORT, LITH_PWR_LOSE_PIN) == SET)
- {
- GPIO_EXTI_EXTIISR_ClrEx(LITH_PWR_LOSE_PORT, LITH_PWR_LOSE_PIN);
-
-// __SYS_STATUS_ALARM_BYTES_SET(lith_remove);
- pwr_vol_g.lith_lose_check_flag = SET;
- }
- if(GPIO_EXTI_EXTIISR_ChkEx(ALKA_PWR_LOSE_PORT, ALKA_PWR_LOSE_PIN) == SET)
- {
- GPIO_EXTI_EXTIISR_ClrEx(ALKA_PWR_LOSE_PORT, ALKA_PWR_LOSE_PIN);
-
-// __SYS_STATUS_ALARM_BYTES_SET(alka_remove);
-
- pwr_vol_g.alka_lose_check_flag = SET;
- }
-
-
+// SysWakeUp_ClockCfg();
+// if(GPIO_EXTI_EXTIISR_ChkEx(KEYA_S1_PORT, KEYA_S1_PIN) == SET)
+// {
+// GPIO_EXTI_EXTIISR_ClrEx(KEYA_S1_PORT, KEYA_S1_PIN);
+// GPIO_EXTI_Close(KEYA_S1_PORT,KEYA_S1_PIN);
+// InfraRed_Uart0_Clk_Init();
+// Key_Awaken_Init();
+// Botton_LPTimer_Clk_Init();
+// LPTIM_CR_EN_Setable(ENABLE);
+//#ifdef RS232_PRINTF
+// printf("KEYA_EXTI\r\n");
+//#endif
+// __SYS_DELAY_SEC_FLAG_CLEAR_(sys_active_time); // ���ϵͳ����ʱ���־λ
+// pwr_vol_g.lith_flag = LMS_KEY; // ���Ѻ�����ɼ�һ�ε���
+// pwr_vol_g.alka_flag = AMS_KEY;
+// if(GPIO_ReadOutputDataBit(LCD_PWR_GPIO_PORT,LCD_PWR_PIN) == Bit_RESET)
+// Lcd_Sys_Init(); // ����������Ļ
+// }
// if(GPIO_EXTI_EXTIISR_ChkEx(VALVE_FORCED_OPEN_PORT, VALVE_FORCED_OPEN_PIN) == SET)
// {
// GPIO_EXTI_EXTIISR_ClrEx(VALVE_FORCED_OPEN_PORT, VALVE_FORCED_OPEN_PIN);
@@ -169,27 +73,47 @@
////#endif
//// }
//// }
-
-}
+// if(GPIO_EXTI_EXTIISR_ChkEx(LITHIUM_PWR_DOWN_PORT, LITHIUM_PWR_DOWN_PIN) == SET)
+// {
+// GPIO_EXTI_EXTIISR_ClrEx(LITHIUM_PWR_DOWN_PORT, LITHIUM_PWR_DOWN_PIN);
+//#ifdef RS232_PRINTF
+// printf("﮵����\r\n");
+//#endif
+// __SYS_STATUS_ALARM_BYTES_SET(lith_remove);
+// pwr_vol_g.lith_vcc_per = 0;
+// SLAVE_PWR_OFF; //�����С���ѹ���ȣ�������������ݻ��ң��Ӷ����¸��ַ�����������������Ҫ�رյ�Դ���ָ����ٿ�����
+//// pwr_vol_g.lith_flag = LMS_PERIOD; // ���������ɼ�һ�ε���
+// }
+// if(GPIO_EXTI_EXTIISR_ChkEx(ALKALI_PWR_DOWN_PORT, ALKALI_PWR_DOWN_PIN) == SET)
+// {
+// GPIO_EXTI_EXTIISR_ClrEx(ALKALI_PWR_DOWN_PORT, ALKALI_PWR_DOWN_PIN);
+//#ifdef RS232_PRINTF
+// printf("������\r\n");
+//#endif
+// __SYS_STATUS_ALARM_BYTES_SET(alka_remove);
+//
+//// pwr_vol_g.alka_flag = AMS_PERIOD; // ���������ɼ�һ�ε���
+// }
+//}
void All_Exti_Init(void)
{
-// CMU_OPCCR1_EXTICKSEL_Set(CMU_OPCCR1_EXTICKSEL_LSCLK);//EXTI�жϲ���ʱ��ѡ��
-// CMU_OPCCR1_EXTICKE_Setable(ENABLE); //EXTI����ʱ��ʹ��
-//
-// GPIO_EXTI_Init( KEYA_S1_PORT, KEYA_S1_PIN, EXTI_FALLING, ENABLE); //�����жϴ��½��ش��������������˲� //PD6
-// GPIO_EXTI_Init( VALVE_FORCED_OPEN_PORT, VALVE_FORCED_OPEN_PIN, EXTI_RISING, ENABLE); //PA1
-// GPIO_EXTI_Init( LITH_PWR_LOSE_PORT, LITH_PWR_LOSE_PIN, EXTI_FALLING, ENABLE); //PF11
-//// GPIO_EXTI_Init( LIT_PWR_UNDER_PORT, LIT_PWR_UNDER_PIN, EXTI_FALLING, ENABLE); //PF6
-// GPIO_EXTI_Init( ALKA_PWR_LOSE_PORT, ALKA_PWR_LOSE_PIN, EXTI_FALLING, ENABLE); //PA4
-//// GPIO_EXTI_Init( UNCAP_DETECTION_PORT, UNCAP_DETECTION_PIN, EXTI_RISING, ENABLE); //PF5
+ CMU_OPCCR1_EXTICKSEL_Set(CMU_OPCCR1_EXTICKSEL_LSCLK);//EXTI�жϲ���ʱ��ѡ��
+ CMU_OPCCR1_EXTICKE_Setable(ENABLE); //EXTI����ʱ��ʹ��
+
+ GPIO_EXTI_Init( KEYA_S1_PORT, KEYA_S1_PIN, EXTI_FALLING, ENABLE); //�����жϴ��½��ش��������������˲� //PD6
+ GPIO_EXTI_Init( VALVE_FORCED_OPEN_PORT, VALVE_FORCED_OPEN_PIN, EXTI_RISING, ENABLE); //PA1
+ GPIO_EXTI_Init( LITHIUM_PWR_DOWN_PORT, LITHIUM_PWR_DOWN_PIN, EXTI_FALLING, ENABLE); //PF11
+// GPIO_EXTI_Init( LIT_PWR_UNDER_PORT, LIT_PWR_UNDER_PIN, EXTI_FALLING, ENABLE); //PF6
+ GPIO_EXTI_Init( ALKALI_PWR_DOWN_PORT, ALKALI_PWR_DOWN_PIN, EXTI_FALLING, ENABLE); //PA4
+// GPIO_EXTI_Init( UNCAP_DETECTION_PORT, UNCAP_DETECTION_PIN, EXTI_RISING, ENABLE); //PF5
-//// GPIO_PINWKSEL_SetEx(PINWKEN_PF5,GPIO_PINWKEN_PINWKSEL_RISING);
-//// GPIO_PINWKEN_SetableEx(PINWKEN_PF5,ENABLE);//ʹ��PB0��NWKUP1����
+// GPIO_PINWKSEL_SetEx(PINWKEN_PF5,GPIO_PINWKEN_PINWKSEL_RISING);
+// GPIO_PINWKEN_SetableEx(PINWKEN_PF5,ENABLE);//ʹ��PB0��NWKUP1����
-// /*NVIC�����*/
-// NVIC_DisableIRQ(GPIO_IRQn);
-// NVIC_SetPriority(GPIO_IRQn,2);//�ж����ȼ�����
-// NVIC_EnableIRQ(GPIO_IRQn);
+ /*NVIC�����*/
+ NVIC_DisableIRQ(GPIO_IRQn);
+ NVIC_SetPriority(GPIO_IRQn,2);//�ж����ȼ�����
+ NVIC_EnableIRQ(GPIO_IRQn);
}
--
Gitblit v1.9.3