From 6ea1a42391f86e72f53042a966dae970a3fd77cb Mon Sep 17 00:00:00 2001
From: jinlicong <493886250@qq.com>
Date: Fri, 17 May 2024 17:18:57 +0800
Subject: [PATCH] 阀门控制进一步完善
---
HARDWARE/EXTI/exti.c | 70 +++++++++++++++++++++-------------
1 files changed, 43 insertions(+), 27 deletions(-)
diff --git a/HARDWARE/EXTI/exti.c b/HARDWARE/EXTI/exti.c
index 9280dfd..6ed076c 100644
--- a/HARDWARE/EXTI/exti.c
+++ b/HARDWARE/EXTI/exti.c
@@ -8,6 +8,10 @@
#include "key.h"
#include "valve_control.h"
#include "system_mem_para.h"
+#include "system_run_fun.h"
+#include "power_manage.h"
+#include "pulse_and_alarm_line.h"
+#include "tim.h"
void NMI_Handler(void)
{
@@ -59,11 +63,13 @@
if(KEY3_IO_READ==Bit_RESET)
{
//����
-
+ if(__SYS_STATUS_BYTES_GET(account_state) == RESET ||__SYS_STATUS_BYTES_GET(valve_lock) == RESET )
+ ValveCtrlOrder(VC_OPEN);
}else if(KEY2_IO_READ==Bit_RESET)
{
//�ط�
-
+ if(__SYS_STATUS_BYTES_GET(account_state) == RESET)
+ ValveCtrlOrder(VC_OPEN);
}else
{
//������Դ
@@ -90,8 +96,8 @@
if(KEY2_IO_READ==Bit_RESET)
{
//�ɼ����������ݲ������ϱ�
-
-
+ start_rs485_g = RS485_START_REASON_KEY;
+ start_wrc_g = WRC_MEANS_KEY;
}
}
}
@@ -120,6 +126,36 @@
}
+
+ if(GPIO_EXTI_EXTIISR_ChkEx(LITH_PWR_LOSE_PORT, LITH_PWR_LOSE_PIN) == SET)
+ {
+ GPIO_EXTI_EXTIISR_ClrEx(LITH_PWR_LOSE_PORT, LITH_PWR_LOSE_PIN);
+
+// __SYS_STATUS_ALARM_BYTES_SET(lith_remove);
+ pwr_vol_g.lith_lose_check_flag = SET;
+ }
+ if(GPIO_EXTI_EXTIISR_ChkEx(ALKA_PWR_LOSE_PORT, ALKA_PWR_LOSE_PIN) == SET)
+ {
+ GPIO_EXTI_EXTIISR_ClrEx(ALKA_PWR_LOSE_PORT, ALKA_PWR_LOSE_PIN);
+
+// __SYS_STATUS_ALARM_BYTES_SET(alka_remove);
+
+ pwr_vol_g.alka_lose_check_flag = SET;
+ }
+
+
+ if(GPIO_EXTI_EXTIISR_ChkEx(LF_PULSE_INT_PORT, LF_PULSE_INT_PIN) == SET) //�Ʒѵ�Ƶ����
+ {
+ GPIO_EXTI_EXTIISR_ClrEx(LF_PULSE_INT_PORT, LF_PULSE_INT_PIN);
+ //Ŀǰ�������Ʒ����幦����û�б����ò���Ҫ����
+ if(((flow_meter_para_g.broken_line_multiplex & BROKEN_LINE_MUTIPLEX_PULSE)!=BROKEN_LINE_MUTIPLEX_PULSE)&& \
+ ((flow_meter_para_g.flow_meter_conn_type==FLOW_METER_CONN_PULSE)||(flow_meter_para_g.flow_meter_conn_type==FLOW_METER_CONN_RS485_AND_PULSE))){
+ pulse_exti_flag = SET;
+ BTx_CR1_CHEN_Setable(BT1,ENABLE); //������ʱ��
+
+ }
+
+ }
// if(GPIO_EXTI_EXTIISR_ChkEx(VALVE_FORCED_OPEN_PORT, VALVE_FORCED_OPEN_PIN) == SET)
@@ -151,27 +187,7 @@
////#endif
//// }
//// }
-// if(GPIO_EXTI_EXTIISR_ChkEx(LITHIUM_PWR_DOWN_PORT, LITHIUM_PWR_DOWN_PIN) == SET)
-// {
-// GPIO_EXTI_EXTIISR_ClrEx(LITHIUM_PWR_DOWN_PORT, LITHIUM_PWR_DOWN_PIN);
-//#ifdef RS232_PRINTF
-// printf("﮵����\r\n");
-//#endif
-// __SYS_STATUS_ALARM_BYTES_SET(lith_remove);
-// pwr_vol_g.lith_vcc_per = 0;
-// SLAVE_PWR_OFF; //�����С���ѹ���ȣ�������������ݻ��ң��Ӷ����¸��ַ�����������������Ҫ�رյ�Դ���ָ����ٿ�����
-//// pwr_vol_g.lith_flag = LMS_PERIOD; // ���������ɼ�һ�ε���
-// }
-// if(GPIO_EXTI_EXTIISR_ChkEx(ALKALI_PWR_DOWN_PORT, ALKALI_PWR_DOWN_PIN) == SET)
-// {
-// GPIO_EXTI_EXTIISR_ClrEx(ALKALI_PWR_DOWN_PORT, ALKALI_PWR_DOWN_PIN);
-//#ifdef RS232_PRINTF
-// printf("������\r\n");
-//#endif
-// __SYS_STATUS_ALARM_BYTES_SET(alka_remove);
-//
-//// pwr_vol_g.alka_flag = AMS_PERIOD; // ���������ɼ�һ�ε���
-// }
+
}
void All_Exti_Init(void)
@@ -181,9 +197,9 @@
//
// GPIO_EXTI_Init( KEYA_S1_PORT, KEYA_S1_PIN, EXTI_FALLING, ENABLE); //�����жϴ��½��ش��������������˲� //PD6
// GPIO_EXTI_Init( VALVE_FORCED_OPEN_PORT, VALVE_FORCED_OPEN_PIN, EXTI_RISING, ENABLE); //PA1
-// GPIO_EXTI_Init( LITHIUM_PWR_DOWN_PORT, LITHIUM_PWR_DOWN_PIN, EXTI_FALLING, ENABLE); //PF11
+// GPIO_EXTI_Init( LITH_PWR_LOSE_PORT, LITH_PWR_LOSE_PIN, EXTI_FALLING, ENABLE); //PF11
//// GPIO_EXTI_Init( LIT_PWR_UNDER_PORT, LIT_PWR_UNDER_PIN, EXTI_FALLING, ENABLE); //PF6
-// GPIO_EXTI_Init( ALKALI_PWR_DOWN_PORT, ALKALI_PWR_DOWN_PIN, EXTI_FALLING, ENABLE); //PA4
+// GPIO_EXTI_Init( ALKA_PWR_LOSE_PORT, ALKA_PWR_LOSE_PIN, EXTI_FALLING, ENABLE); //PA4
//// GPIO_EXTI_Init( UNCAP_DETECTION_PORT, UNCAP_DETECTION_PIN, EXTI_RISING, ENABLE); //PF5
//// GPIO_PINWKSEL_SetEx(PINWKEN_PF5,GPIO_PINWKEN_PINWKSEL_RISING);
--
Gitblit v1.9.3