增加休眠，开始上板测试

jinlicong

2024-05-29 6c7e61a54ef9b96f79704f0b965664e89f57dd52

 HARDWARE/EXTI/exti.c

@@ -13,6 +13,8 @@
#include "pulse_and_alarm_line.h"
#include "tim.h"
#include "wireless_remote_comm.h"
#include "main.h"
#include "lcd.h"

void NMI_Handler(void)
{
@@ -31,6 +33,7 @@
{
//   if(__SYS_DELAY_SEC_FLAG_GET(sys_active_time) == SET && LargeCurrent_LimitingProcess() == 3)
      SysWakeUp_ClockCfg();
	
   if(GPIO_EXTI_EXTIISR_ChkEx(EXT_RTC_INT_PORT, EXT_RTC_INT_PIN)  == SET) //RTCÖжÏ
   {
      GPIO_EXTI_EXTIISR_ClrEx(EXT_RTC_INT_PORT, EXT_RTC_INT_PIN);
@@ -67,12 +70,12 @@
      
      if(KEY1_IO_READ==Bit_RESET)
      {
         if(KEY3_IO_READ==Bit_RESET)
         if((KEY3_IO_READ==Bit_RESET)&&(__SYS_DELAY_SEC_TIME_GET_(sys_active_time) >0))
         {
            //¿ª·§
            if(__SYS_STATUS_BYTES_GET(account_state) == RESET ||__SYS_STATUS_BYTES_GET(valve_lock) == RESET )
               ValveCtrlOrder(VC_OPEN);
         }else if(KEY2_IO_READ==Bit_RESET)
         }else if((KEY2_IO_READ==Bit_RESET)&&(__SYS_DELAY_SEC_TIME_GET_(sys_active_time) >0))
         {
            //¹Ø·§
            if(__SYS_STATUS_BYTES_GET(account_state) == RESET)
@@ -80,7 +83,8 @@
         }else
         {
            //µ¥»÷µçÔ´
				
            __SYS_DELAY_SEC_TIME_SET_(sys_active_time,SYS_WAKE_UP_TIME);
            lcd_wake_up_flag_g = 1;
         }
         
      }
@@ -91,7 +95,10 @@
      GPIO_EXTI_EXTIISR_ClrEx(KEY2_PORT, KEY2_PIN);
      if(KEY2_IO_READ==Bit_RESET)         
      {
			
         lcd_wake_up_flag_g = 1;
         if(__SYS_DELAY_SEC_TIME_GET_(sys_active_time) >0){ //¼¤»îºóÈÎÒâ°´¼üÖØÖü¤»îʱ¼ä
            __SYS_DELAY_SEC_TIME_SET_(sys_active_time,SYS_WAKE_UP_TIME);
         }
      }
   }
   
@@ -105,15 +112,22 @@
            //²É¼¯Á÷Á¿¼ÆÊý¾Ý²¢´¥·¢Éϱ¨
            start_rs485_g = RS485_START_REASON_KEY;
            start_wrc_g = WRC_MEANS_KEY;
         }else{
            lcd_wake_up_flag_g = 1;
         }
			
         if(__SYS_DELAY_SEC_TIME_GET_(sys_active_time) >0){ //¼¤»îºóÈÎÒâ°´¼üÖØÖü¤»îʱ¼ä
            __SYS_DELAY_SEC_TIME_SET_(sys_active_time,SYS_WAKE_UP_TIME);
         }
			
      }
   }
   
   if(GPIO_EXTI_EXTIISR_ChkEx(KEY4_PORT, KEY4_PIN)  == SET) //key4ÖжÏ
   {
      GPIO_EXTI_EXTIISR_ClrEx(KEY4_PORT, KEY4_PIN);
//   if(GPIO_EXTI_EXTIISR_ChkEx(KEY4_PORT, KEY4_PIN)  == SET) //key4ÖжÏ
//   {
//      GPIO_EXTI_EXTIISR_ClrEx(KEY4_PORT, KEY4_PIN);

   }
//   }
   
   if(GPIO_EXTI_EXTIISR_ChkEx(Motor_OP_PORT, Motor_OP_PIN)  == SET) //·§ÃÅ¿ªµ½Î»ÖжÏ
   {
@@ -158,13 +172,34 @@
      if(((flow_meter_para_g.broken_line_multiplex & BROKEN_LINE_MUTIPLEX_PULSE)!=BROKEN_LINE_MUTIPLEX_PULSE)&&   \
      ((flow_meter_para_g.flow_meter_conn_type==FLOW_METER_CONN_PULSE)||(flow_meter_para_g.flow_meter_conn_type==FLOW_METER_CONN_RS485_AND_PULSE))){
         pulse_exti_flag = SET;
         BTx_CR1_CHEN_Setable(BT1,ENABLE);   //¿ªÆô¶¨Ê±Æ÷
			
         BTx_CR1_CHEN_Setable(BT1,ENABLE);   //¿ªÆô¶¨Ê±Æ÷			
      }
   }
	
   if(GPIO_EXTI_EXTIISR_ChkEx(HWIDO_EX_PWR_PORT, HWIDO_EX_PWR_PIN)  == SET) //ÍâµçÒƳýÖжÏ
   {
      GPIO_EXTI_EXTIISR_ClrEx(HWIDO_EX_PWR_PORT, HWIDO_EX_PWR_PIN);
      //ÍâµçÒƳýÁËÁ¢¼´¹Ø±ÕÍâµç¿ØÖÆ
      EX_PWR_OFF;
//      __SYS_STATUS_BYTES_STATUS(power_state, RESET, ALARM_ID_NORMAL);

   }
   
   
   if(GPIO_EXTI_EXTIISR_ChkEx(LIMIT_TRIGGER_PORT, LIMIT_TRIGGER_PIN)  == SET) //ÏÞÁ÷´¥·¢
   {
      GPIO_EXTI_EXTIISR_ClrEx(LIMIT_TRIGGER_PORT, LIMIT_TRIGGER_PIN);
      //¼Ç¼ÏÞÁ÷´¥·¢Ê±µÄÐÅÏ¢
      arrayA_2_arrayB((uint8_t *)&sys_clockBCD_g.year,&limit_trigger_record_para_g.record_time_BCD.year,sizeof(sys_clockBCD_g),LITTLE_ENDIAN);
      limit_trigger_record_para_g.trigger_times ++;
      limit_trigger_record_para_g.RS485_running_flag = sys_fun_run_ctrl_g.rs485_ctrl_flag.running_flag;
      limit_trigger_record_para_g.valve_running_flag = sys_fun_run_ctrl_g.valve_ctrl_flag.running_flag;
      limit_trigger_record_para_g.wrc_running_flag = sys_fun_run_ctrl_g.wrc_ctrl_flag.running_flag;
      limit_trigger_record_para_g.EXPWR_check_status = HWIDO_EX_PWR_IO_READ;
      limit_trigger_record_para_g.EXPWR_ctrl_status = __SYS_STATUS_BYTES_GET(power_state);
   }
	
	
//   if(GPIO_EXTI_EXTIISR_ChkEx(VALVE_FORCED_OPEN_PORT, VALVE_FORCED_OPEN_PIN)  == SET)
//   {
//      GPIO_EXTI_EXTIISR_ClrEx(VALVE_FORCED_OPEN_PORT, VALVE_FORCED_OPEN_PIN);